Nieuw TyreON TSC3000X2s full rise scissorlift - mechanical lock schaarhefbrug

Capacity 3000 kg - On floor
Lifting height 10,5 - 190,5 cm
Platform length 145 - 205 cm
Drive 2.2 kW Electric - Hydraulic
Type Fully automatic
► Mechanical safety lock
► Pressurized air is required
► Auto-stop at 25 cm + slow descend
► IR synchronization monitoring
► Own weight 900 kg
► Quick and easy to install (video)
► Broken hose protection
Including Floor bolts
A coded hydraulic hose set
Package L170 x B80 x H150 cm - 995 kg
Voltage 400V or 230V

All-round full rise scissorlift for short to long passenger cars, delivery vans, light commercial vehicles and busses.

Low profile of just 10.5 cm.
Simple to use and maintain and ideal for limited space.

With four powerful hydraulic cylinders and a tip-lever lifting system for lifting with full force from the lowest point.
Safe double scissor lift, solid construction, for professional use. Fully automatic lifting and lowering at the touch of a button.
The car lift stops immediately at a 15 mm height difference between the two platforms or if a person walks between the platforms during lift or descend.
TyreON TSC3000X2s
Professional full rise scissorlift - Fully automatic
Wheel free double scissor lift with all conceivable options
Controller with hydraulic pump unit
The ramps can be fixed horizontally for long vehicles up to 3T
Easy access due to the 63.5 cm wide platforms and ramps with anti-slip profile
Also suitable for low ground clearance vehicles
Significant 190,5 cm lifting height
Comes standard with 4 rubber lifting blocks
Variable positioning of the 24V all-in-one controller
Variable space between the platforms 75 - 85 cm
No annoying cross connections - free passage
Tip-lever-lifting system and 2 powerful hydraulic cylinders per platform
Scissors made of solid steel
Lock function
Auto-stop at 25 cm height
Acoustic and optical signal when lowering from 25 cm
Mechanical safety locks every 5 cm
Automatic pneumatic release
Lifting platforms - hydraulically synchronized - up and down simultaneously (Master-Slave cylinder follow principle)
Electronic synchronization monitoring by means of IR light barrier / beam
Height switch - stops the hydraulic pump unit when the carlift reaches the highest point
Central check valve - prevents the lift from dropping in the event of oil pressure failure
Pressure relief valve - prevents damage to the carlift in case of weight overload
Procedure for lowering in the event of a power failure
Supplied with installation materials, hydraulic hose set and cover gutters
Video instruction for installation
Full rise scissorlift - Floor mounted
This flat full rise scissorlift is bolted to the floor surface and connected to the controller.
This neatly finished double scissor lift has a long technical life due to the applied process techniques, careful assembly and the use of first-class materials.
Full rise scissorlift - Professional heavy duty version
The hydraulic working pressure (upward force) and the lowering speed can be adjusted
Reinforcement profiles on the inner sides of the lifting tables
Protective caps on the lifting cylinders with the pneumatic release
Lifting platforms and ramps made of thick sheet steel
Finished with powder coating
On-off main switch with indicator light on control panel
Floor requirement of only 150 mm concrete
Simple bleeding of the hydraulic system with bleeding valves on the cylinders
Two handy cranes on the hydraulic pump unit for leveling the platforms
TyreON TSC3000X2s full rise scissorlift
Technical details full rise scissorlift          
Lifting capacity 3000 kg    
Maximum lifting height 190,5  (187 without blocks) cm    
Initial drive on height 10,5 cm    
Time lifting / lowering 40 / 30 sec    
Platform length 145 - 205 (ramps up) cm  
Width platforms 63,5 cm    
Space between the lift platforms 75 - 85 (with the supplied hose set) cm    
         
Other information        
Type Electric - Hydraulic      
Engine power 2,2 kW    
Required air pressure 4 - 8 Bar    
Hydraulic working pressure 25 / 250 Mpa / Bar    
Voltage (50Hz) 230/1Ph  or  400/3Ph Volt    
Ampere of fuse  16  or  20  Ampere    
Noise level